Overview
Used to quickly collect water samples with the Splashdrone 4. Quickly bring water samples from hard to access areas to operators on the shore and even land on the water for on the spot water quality analysis. Compared with conventional methods collecting samples with a drone improves safety, accuracy and efficiency - reducing costs spent on equipment and reliance on field personnel.
NO STOCK - 6 MONTHS LEAD TIME
Reduce Time by 75%
SplashDrone 4 drastically increases the mobility of the operation. In 1 minute, SplashDrone 4 can reach any location within 600 meters and proceed with collecting water samples. It significantly reduces the amount of time needed for the total operation.
Reduce Costs by 90%
When collecting water with SplashDrone 4, you eliminate or reduce the need for a boat as well as maintenance and specialized training.
Precise Targeting
Using the Waypoint function, SplashDrone 4 can automatically navigate to a specific location based on the GPS coordinates you set on the App. After the drone arrives at the target location, you can land it on the water surface to collect water, and then fly it back to retrieve the water samples.
Repeatable Data Collection
With the Route Saved feature, operators can save the sampling location and quickly re-access the exact location for the next operation, allowing for a repeatable, consistent water sampling data collection.
Risk-free Drone Operation
No need to worry about water getting in the drone like every other drone on the market. SplashDrone 4 offers a complete waterproof UAV solution with its IP67 waterproof rating. You can land the drone on the water as well as fly in the rain. Our SplashDrone 4 provides you with the capability for a continuous, risk-free solution in any harsh environment.
Risk-free Human Operation
SplashDrone 4 eliminates the need for operators to travel over the water surface or enter hazardous areas.
On-site Water Assessment
Instead of bringing samples back to the lab, you can test the water quality right on the spot. When used with one of the compatible water quality sensors, the system can immediately upload real-time water data to a cloud server where a few basic assessments will be conducted. The water quality information with corresponding GPS coordinates can be saved on the server for a later more comprehensive reassessment.
Please note the sensor kit is purchased seperately
 |
 |
 |
| PH Sensor |
Turbidity Sensor |
Ammonia Nitrogen Sensor |
| Measuring range: 0...14pH Temperature range: 0-80.0℃, 0-60℃ Slope percentage: ≥96% Shell material: PC, PBT Waterproof: IP68 Zero point: 7.00±0.25 Pressure range: 0...4bar Output: 4...20mA, RS485 |
Measuring range: 0-4000NTU 0-4000mg/L Temperature range: 0.0...80.0℃ Shell material: Stainless steel Accuracy: +1.0% FS Power supply: DC 12V Waterproof: IP68 Pressure range: 0...4bar Output: 4...20mA, max. load 7500RS485 /MODBUS-RTU |
Measuring range: 0.1...18000ppm Temperature range: 0.0...60℃ Slope percentage: ≥96% Shell material: PC, PBT Waterproof: IP68 Zero point: 56±4mV（25℃） Pressure range: 0...3bar Output: 4...20mA, RS485 |
 |
 |
| Dissolved Oxygen Sensor |
Conductivity Sensor |
| Measuring range: 0.0...20.00mg/L Temperature range: 0.0...60℃ Accuracy: 2% Shell material: PC+stainless steel Sensitivity: +0.05% Waterproof: IP68 Pressure range: 0...4bar Output: 4...20mA, RS485 |
Measuring range: 0...20000μS/cm Temperature range: 0.0...60℃ Sensitivity: +2%FS Resolution: 1μS/cm Shell material: ABS, PPS Waterproof: IP68 Pressure range: 0...4bar Output: 4...20mA, RS485 |
Spec Sheet
Water Collector
|
|
| Weight |
56g |
Bottle Cap Finish
|
30-400/410/415
Diameter: 30 mm
Height: 9 mm
|
Bottle Sizes
|
For standard 350 ml & 550 ml plastic water bottle |
Material
|
Aluminum |
